Monitoring The Ssl Vpn Status - Cisco ISA500 Series Administration Manual

VPN
Viewing the VPN Status
STEP 1
STEP 2
STEP 3
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
• Remote Gateway: The IP address of the remote gateway for a Site-to-Site
VPN session or the IP address of the remote client for a Cisco IPSec VPN
session.
• Tx Bytes: The total volume of traffic in Kilobytes transmitted from the VPN
tunnel.
• Rx Bytes: The total volume of traffic in Kilobytes received from the VPN
tunnel.
• Tx Pkts: The number of IP packets transmitted from the VPN tunnel.
• Rx Pkts: The number of IP packets received from the VPN tunnel.

Monitoring the SSL VPN Status

The SSL VPN Monitoring page displays the status and traffic statistic information
of all active SSL VPN sessions.
Click VPN -> Session Status -> SSL VPN Monitoring.
The SSL VPN Monitoring window opens.
In the Active Sessions tab, all active SSL VPN sessions are listed in the table.
• Session ID: The SSL VPN session ID.
• User Name: The name of the logged SSL VPN user.
• Client IP (Actual): The actual IP address used by the SSL VPN client.
• Client IP (VPN): The virtual IP address of the SSL VPN client assigned by the
SSL VPN gateway.
• Time Connected: The amount of time since the user first established the
connection.
• Disconnect: Click Disconnect to terminate an active SSL VPN session and
hence the associated SSL VPN tunnel.
• Disconnect All: Click Disconnect All to terminate all active SSL VPN
sessions and hence all associated SSL VPN tunnels.
In the SSL VPN Statistics tab, you can see the statistic information for all active
SSL VPN sessions or for a single SSL VPN session.
8
270