Administration; Changing The User Name And Password For The Default Administrator Account - Cisco ISA500 Series Administration Manual

Device Management

Administration

STEP 3
Administration
STEP 1
STEP 2
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
- All IP Addresses: Any IP address from a remote WAN network can
access the Configuration Utility.
- Single Address: Only the specified remote host can access the
Configuration Utility. Enter the IP address of the remote host in the IP
Address field.
- Network Range: Only the hosts in the specified remote network can
access the Configuration Utility. Enter the starting IP address in the From
field and the ending IP address in the To field.
• Remote SNMP: Click On to enable SNMP for the remote connection, or click
Off to disable SNMP. Enabling SNMP allows remote users to use SNMP to
manage the device from WAN side.
Click Save to apply your settings.
Use the Administration page to modify the user name and password of the default
adminstrator account, and configure the user session settings. It includes the
following topics:
• Changing the User Name and Password for the Default Administrator
Account, page 290
• Configuring the User Session Settings, page 291
Changing the User Name and Password for the Default
Administrator Account
To prevent unauthorized access, you are forced to immediately change the default
user name and password of the default administrator account at its first login. This
page provides another approach to modify its user name and password, but not
for the first login.
Click Device Management -> Administration.
The Administration window opens.
In the Administrator name & password area, enter the following information:
10
290