Configuration Tasks To Establish A Ssl Vpn Tunnel - Cisco ISA500 Series Administration Manual

VPN
Configuring the SSL VPN
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
• SSL VPN Group Policies: The default SSL VPN policy
("SSLVPNDefaultPolicy") is sufficient for most purposes. As needed, you
can custom new policies to meet specific business needs. See
the SSL VPN Group Policies, page
• Cisco AnyConnect VPN Client: The Cisco AnyConnect VPN Client is the
next-generation VPN client, providing remote users with secure VPN
connections to the security appliance.

Configuration Tasks to Establish a SSL VPN Tunnel

You need to complete below configuration tasks to establish a SSL VPN tunnel.
• Download and install the Cisco AnyConnect VPN Client software on remote
user's PC. See
page 260.
• Import the SSL VPN certificate to your security appliance used for user
authentication. See
page 260.
• Enable and configure the SSL VPN gateway on your security appliance.
See Configuring the SSL VPN Gateway, page
• Define the SSL VPN group policies. See
Policies, page
• Add SSL VPN users and user groups, and then specify the SSL VPN group
policy for each SSL VPN user group. See
page 260.
• Launch the Cisco AnyConnect VPN Client on the user's PC, enter the
gateway IP Address:gateway interface to connect the remote gateway, and
then enter the user name and password to establish a SSL VPN tunnel.
• Check the status and statistic information of all SSL VPN sessions. See
Monitoring the SSL VPN Status, page
Installing the Cisco AnyConnect VPN Client on User's PC,
Importing the Certificates for User Authentication,
263.
263.
261.
Configuring the SSL VPN Group
Configuring the SSL VPN Users,
270.
8
Configuring
259