Configuration Management; Saving Your Current Configurations - Cisco ISA500 Series Administration Manual

Device Management

Configuration Management

Configuration Management
NOTE
STEP 1
STEP 2
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
You can perform the following tasks to maintain the configurations:
• Save the current settings used on your security appliance. See
Current Configurations, page
• Restore your settings from a saved configuration file. See
Settings from a Saved Configuration File, page
• Revert to the factory default settings. See
Default Settings, page

Saving your Current Configurations

You can save your current settings as a configuration file on the local PC or on a
USB device if applicable.
When saving the configurations to a file, the security license and self-certificates
will not be saved in the file.
Click Device Management -> Firmware and Configuration -> Configuration.
The Configuration window opens.
To save the current settings on your local PC, perform the following steps:
a. In Backup/Restore Settings area, click Backup after the Save A Copy of
Current Settings option. The Encryption window opens.
b. You can optionally encrypt the configurations for security purposes. If you do
not encrypt the configurations, click OK.
c. If you want to encrypt the configurations, check the Encrypt box and enter the
password in the Key field, and then click OK.
d. Locate where to save the configuration file, and then click Save.
294.
Reverting to the Factory
296.
10
Saving your
Restoring your
295.
294