Cisco ISA500 Series Administration Manual page 323

Device Management
Configuring the Email Alert Settings
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
Alert Description
Category
WAN UP/ Sends an alert email if the
DOWN WAN interface link is UP or
Alert DOWN.
IPSec Sends an alert email if the
Alert IPSec VPN tunnel
negotiation fails.
IPS Alert Sends an alert email if an
attack is detected over the
specified email alert
threshold for IPS categories
or IM and P2P applications.
You first need to enable the
IPS service and specify the
email alert thresholds for
the IM and P2P Blocking
feature and/or the IPS
Policy and Protocol
Inspection feature. See
Intrusion Prevention
Service, page
Firmware Sends an alert email if a
Upgrade new firmware is found after
Alert automatically checking the
firmware.
Configurations
To Email Address: Enter
the email address to
receive the alert messages.
Alert Interval: Specify how
often in minutes the
security appliance sends
the alert messages for
WAN down or up events.
To Email Address: Enter
the email address to
receive the alert messages.
To Email Address: Enter
the email address to
receive the alert messages.
214.
To Email Address: Enter
the email address to
receive the alert messages.
10
317