Cisco ISA500 Series Administration Manual page 174

Wireless Configuration for ISA550W and ISA570W
Configuring the Access Points
STEP 10
STEP 11
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
You can also change the settings in the above fields.The RADIUS
NOTE
server settings you specify will replace the default settings of the
selected group. Go to the Device Management -> RADIUS Settings
page to maintain the RADIUS server settings. See
RADIUS Servers, page
If you choose WPA2-Enterprise as the security mode, enter the following
information:
• Encryption: WPA2-Enterprise always uses AES encryption algorithm for
data encryption.
• Key Renewal Timeout: Enter a value to set the interval at which the key is
refreshed for clients associated to this AP. The valid range is 0 to 86400
seconds. A value of 0 indicates that the key is not refreshed. The default is
3600 seconds.
• RADIUS Server ID: Choose an existing RADIUS group for client
authentication. The RADIUS server settings of the selected group are
displayed. You can also change the RADIUS server settings.The RADIUS
server settings you specify will replace the default settings of the selected
group. Go to the Device Management -> RADIUS Settings page to
maintain the RADIUS server settings. See
Servers, page
If you choose WPA/WPA2-Enterprise Mixed as the security mode, enter the
following information:
• Encryption: WPA/WPA2-Enterprise Mixed automatically choose TKIP or
AES encryption algorithm for data encryption.
• Key Renewal Timeout: Enter a value to set the interval at which the key is
refreshed for clients associated to this AP. The valid range is 0 to 86400
seconds. A value of 0 indicates that the key is not refreshed. The default is
3600 seconds.
• RADIUS Server ID: Choose an existing RADIUS group for client
authentication. The RADIUS server settings of the selected group are
displayed. You can also change the RADIUS server settings.The RADIUS
server settings you specify will replace the default settings of the selected
group. Go to the Device Management -> RADIUS Settings page to
maintain the RADIUS server settings. See
Servers, page
319.
319.
319.
Configuring the
Configuring the RADIUS
Configuring the RADIUS
5
168