Cisco ISA500 Series Administration Manual page 341

Troubleshooting
Internet Connection
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
Symptom: The security appliance cannot obtain an IP address from the ISP.
Recommended Actions:
Turn off power to the cable or DSL modem.
Turn off the security appliance.
Wait 5 minutes, and then reapply power to the cable or DSL modem.
When the modem LEDs indicate that it has resynchronized with the ISP, reapply
power to the security appliance. If the security appliance still cannot obtain an ISP
address, see the next symptom.
Symptom: The security appliance still cannot obtain an IP address from the ISP.
Recommended Actions:
Click Networking -> WAN in the left hand navigation pane.
Click Edit.
The WAN - Add/Edit window opens.
Ask your ISP the following questions:
• What type of network addressing mode is required for your Internet
connection? In the IPv4 tab, choose the correct ISP connection type in the
IP Address Assignment drop-down list, and then enter the account
information as specified by the ISP.
• Is your ISP expecting you to login from a particular Ethernet MAC address?
If yes, in the IPv4 tab, choose Use the following MAC address from the
MAC Address Source drop-down list, and then enter the required MAC
address in the MAC Address field.
Symptom: The security appliance can obtain an IP address, but PC is unable to
load Internet pages.
Recommended Actions:
A
335