Installation - Cisco ISA500 Series Administration Manual

Getting Started

Installation

NOTE
Installation
Cisco ISA500 Series Integrated Security Appliance Administration Guide
Back Panel Descriptions
Feature
ANT01/ANT02
USB Port
Configurable
Ports
LAN Ports
WAN Port
RESET Button
Power Switch
Power
Connector
The back panel of ISA550 and ISA570 does not include two threaded connectors
for the antennas.
This section describes how to install the security appliance. It includes the
following topics:
• Before You Begin, page 19
Description
Threaded connectors for the antennas (for ISA550W and
ISA570W only).
Connects the unit to a USB device. You can use a USB
device to backup and restore the configurations, or to
upgrade the firmware images.
Can be set to operate as WAN, LAN, or DMZ ports. The
ISA550 and ISA550W have 4 configurable ports. The
ISA570 and ISA570W have 5 configurable ports.
Connects PCs and other network appliances to the unit.
The ISA550 and ISA550W have 2 dedicated LAN ports.
The ISA570 and ISA570W have 4 dedicated LAN ports.
Connects the unit to a DSL or a cable modem, or another
WAN connectivity device.
To reboot the unit, push and release the RESET button. To
restore the factory default settings, push and hold the
RESET button for 3 seconds.
Turns the unit on or off.
Connects the unit to power using the supplied power cord
and adapter.
1
18