Displaying Switch Hardware/Software Versions - SMC Networks SMC8126L2 Management Manual

CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5
Console(config)#snmp-server location WC 9
Console(config)#snmp-server contact Ted
Console(config)#exit
Console#show system
System description
SWITCH
System OID string
System information
System Up time
System Name
System Location
System Contact
MAC address
Web server
Web server port
Web secure server
Web secure server port : 443
Telnet server
Telnet port
Jumbo Frame
POST result
UART Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device 1 Test ............ PASS
I2C Bus Initialization ....... PASS
Switch Int Loopback Test ..... PASS
Fan Speed Test ............... PASS
Done All Pass.
Console#

Displaying Switch Hardware/Software Versions

Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal power supply.
Management Software
• EPLD Version – Version number of the Electronically Programmable Logic Device
code.
• Loader Version – Version number of loader code.
• Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.
• Operation Code Version – Version number of runtime code.
• Role – Shows that this switch is operating as Master or Slave.
: TigerSwitch 10/100/1000 26/50 PORT MANAGED
: 1.3.6.1.4.1.202.20.68
: 0 days, 0 hours, 14 minutes, and 32.93 seconds
: [NONE]
: [NONE]
: [NONE]
: 00-00-35-28-10-03
: enabled
: 80
: enabled
: enable
: 23
: Disabled
Basic Configuration
4-25
4-103
4-103
4-61
3-11
3