Show Queue Cos-Map; Priority Commands (Layer 3 And 4); Map Ip Dscp (Global Configuration); Table 4-64 Priority Commands (Layer 3 And 4) - SMC Networks SMC8126L2 Management Manual

Example
Console#show queue bandwidth
Queue ID Weight
-------- ------
0 1
1 2
2 4
3 8
Console#

show queue cos-map

This command shows the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Always unit 1)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show queue cos-map ethernet 1/1
Information of Eth 1/1
Traffic Class : 0 1 2 3 4 5 6 7
Priority Queue: 1 0 0 1 2 2 3 3
Console#

Priority Commands (Layer 3 and 4)

Command
map ip dscp
map ip dscp
show map ip dscp

map ip dscp (Global Configuration)

This command enables IP DSCP mapping (i.e., Differentiated Services Code Point
mapping). Use the no form to disable IP DSCP mapping.
Table 4-64 Priority Commands (Layer 3 and 4)
Function
Enables IP DSCP class of service mapping
Maps IP DSCP value to a class of service
Shows the IP DSCP map
Priority Commands
Mode Page
GC 4-189
IC 4-190
PE 4-191
4-189
4