Configuring 802.1X Global Settings; Figure 3-39 802.1X Global Information; Figure 3-40 802.1X Global Configuration - SMC Networks SMC8126L2 Management Manual

3
Configuring the Switch
Web – Click Security, 802.1X, Information.
CLI – This example shows the default global setting for 802.1X.
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 disabled
.
.
802.1X Port Details
802.1X is disabled on port 1/1
.
.
802.1X is disabled on port 1/26
Console#

Configuring 802.1X Global Settings

The 802.1X protocol provides port authentication. The 802.1X protocol must be
enabled globally for the switch system before port settings are active.
Command Attributes
• 802.1X System Authentication Control – Sets the global setting for 802.1X.
(Default: Disabled)
Web – Select Security, 802.1X, Configuration. Enable 802.1X globally for the switch,
and click Apply.
CLI – This example enables 802.1X globally for the switch.
Console(config)#dot1x system-auth-control
Console(config)#
3-62

Figure 3-39 802.1X Global Information

Operation Mode
Single-Host
Single-Host

Figure 3-40 802.1X Global Configuration

Mode
ForceAuthorized
ForceAuthorized
4-86
Authorized
n/a
n/a
4-81