Hostname; User Access Commands; Username; Table 4-9 User Access Commands - SMC Networks SMC8126L2 Management Manual

Example
Console(config)#prompt RD2
RD2(config)#

hostname

This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname RD#1
Console(config)#

User Access Commands

The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 4-10), user authentication via a remote authentication
server (page 4-70), and host access authentication for specific ports (page 4-81).
Command

username

enable password
username
This command adds named users, requires authentication at login, specifies or
changes a user's password (or specify that no password is required), or specifies or
changes a user's access level. Use the no form to remove a user name.
Syntax
username name {access-level level | nopassword |
password {0 | 7} password}
no username name

Table 4-9 User Access Commands

Function
Establishes a user name-based authentication system at login
Sets a password to control access to the Privileged Exec level
System Management Commands
4
Mode Page
GC 4-25
GC 4-26
4-25