Telnet Server Commands; Ip Telnet Port; Table 4-14 Telnet Server Commands - SMC Networks SMC8126L2 Management Manual

4
Command Line Interface
• If you change the HTTPS port number, clients attempting to connect to the
HTTPS server must specify the port number in the URL, in this format:
https://device:port_number
Example
Console(config)#ip http secure-port 1000
Console(config)#
Related Commands
ip http secure-server (4-30)

Telnet Server Commands

Command

ip telnet port

ip telnet server
ip telnet port
This command specifies the TCP port number used by the Telnet interface. Use the
no form to use the default port.
Syntax
ip telnet port port-number
no ip telnet port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
23
Command Mode
Global Configuration
Example
Console(config)#ip telnet port 123
Console(config)#
Related Commands
ip telnet server (4-33)
4-32

Table 4-14 Telnet Server Commands

Function
Specifies the port to be used by the Telnet interface
Allows the switch to be monitored or configured from Telnet
Mode Page
GC 4-29
GC 4-30