Show Calendar; System Status Commands; Show Startup-Config; Table 4-23 System Status Commands - SMC Networks SMC8126L2 Management Manual

Default Setting
None
Command Mode
Privileged Exec
Example
This example shows how to set the system clock to 15:12:34, April 1st, 2004.
Console#calendar set 15 12 34 1 April 2004
Console#

show calendar

This command displays the system clock.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Example
Console#show calendar
15:12:43 April 1 2004
Console#

System Status Commands

Command

show startup-config

show running-config
show system
show users
show version
show startup-config
This command displays the configuration file stored in non-volatile memory that is
used to start up the system.
Default Setting
None
Command Mode
Privileged Exec

Table 4-23 System Status Commands

Function
Displays the contents of the configuration file (stored in flash
memory) that is used to start up the system
Displays the configuration data currently in use
Displays system information
Shows all active console and Telnet sessions, including user
name, idle time, and IP address of Telnet clients
Displays version information for the system
System Management Commands
4
Mode Page
PE 4-57
PE 4-59
NE, PE 4-61
NE, PE 4-61
NE, PE 4-62
4-57