Table 4-47 Show Lacp Counters - Display Description; Default Setting; Command Mode; Privileged Exec - SMC Networks SMC8126L2 Management Manual

Default Setting

Port Channel: all

Command Mode

Privileged Exec

Example
Console#show lacp 1 counters
Port channel : 1
-------------------------------------------------------------------------
Eth 1/ 1
-------------------------------------------------------------------------
LACPDUs Sent : 21
LACPDUs Received : 21
Marker Sent : 0
Marker Received : 0
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
. .
.
Table 4-47
Field
LACPDUs Sent
LACPDUs Received
Marker Sent
Marker Received
LACPDUs Unknown Pkts Number of frames received that either (1) Carry the Slow Protocols Ethernet
LACPDUs Illegal Pkts
Console#show lacp 1 internal
Port channel : 1
-------------------------------------------------------------------------
Oper Key : 4
Admin Key : 0
Eth 1/1
-------------------------------------------------------------------------
LACPDUs Internal : 30 sec
LACP System Priority : 32768
LACP Port Priority : 32768
Admin Key : 4
Oper Key : 4
Admin State : defaulted, aggregation, long timeout, LACP-activity
Oper State : distributing, collecting, synchronization, aggregation,
long timeout, LACP-activity
. .
.
show lacp counters - display description
Description
Number of valid LACPDUs transmitted from this channel group.
Number of valid LACPDUs received on this channel group.
Number of valid Marker PDUs transmitted from this channel group.
Number of valid Marker PDUs received by this channel group.
Type value, but contain an unknown PDU, or (2) are addressed to the Slow
Protocols group MAC Address, but do not carry the Slow Protocols Ethernet
Type.
Number of frames that carry the Slow Protocols Ethernet Type value, but contain
a badly formed PDU or an illegal value of Protocol Subtype.
Link Aggregation Commands
4
4-137