Radius-Server Timeout; Show Radius-Server - SMC Networks SMC8126L2 Management Manual

4
Command Line Interface

radius-server timeout

This command sets the interval between transmitting authentication requests to the
RADIUS server. Use the no form to restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits for a reply
before resending a request. (Range: 1-65535)
Default Setting
5
Command Mode
Global Configuration
Example
Console(config)#radius-server timeout 10
Console(config)#

show radius-server

This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show radius-server
Remote RADIUS server configuration:
Global settings
Communication key with RADIUS server:
Server port number:
Retransmit times:
Request timeout:
Sever 1:
Server IP address: 192.168.1.1
Communication key with RADIUS server: *****
Server port number: 1812
Retransmit times:
Request timeout:
Console#
4-76
2
5
1812
2
5