Cisco ASA Series Cli Configuration Manual page 1882

Configuring File Access
Note
Before configuring file access, you must configure the shares on the servers for user access.
CIFS File Access Requirement and Limitation
To access
permission for all parent folders, including the share itself.
Use Download or Upload to copy and paste files to and from CIFS directories and the local desktop.
The Copy and Paste buttons are intended for remote to remote actions only, not local to remote, or remote
to local.
The CIFS browse server feature does not support double-byte character share names (share names
exceeding 13 characters in length). This only affects the list of folders displayed, and does not affect user
access to the folder. As a workaround, you can pre-configure the bookmark(s) for the CIFS folder(s) that
use double-byte share names, or the user can enter the URL or bookmark of the folder in the format
cifs://server/<long-folder-name> . For example:
Adding Support for File Access
Configure file access as follows:
Note
The first procedure describes how to specify the master browser and WINS servers. As an alternative,
you can use ASDM to configure URL lists and entries that provide access to file shares.
Adding a share in ASDM does not require a master browser or a WINS server. However, it does not
provide support for the Browse Networks link. You can use a hostname or an IP address to refer to
ServerA when entering this command. If you use a hostname, the ASA requires a DNS server to resolve
it to an IP address.
Detailed Steps
Command
Step 1
webvpn
Step 2
tunnel-group webvpn
Cisco ASA Series CLI Configuration Guide
1-74
\\server\share\subfolder\personal
cifs://server/Do you remember?
cifs://server/Do%20you%20remember%3F
Chapter 1 Configuring Clientless SSL VPN
, the user must have a minimum of read
folder
Purpose
Switches to webvpn configuration mode.
Switches to tunnel-group webvpn configuration
mode.