Cisco ASA Series Cli Configuration Manual page 1961

Chapter 1 Configuring AnyConnect Host Scan
Command
show webvpn csd hostscan
Example:
hostname# show webvpn csd hostscan
Uninstalling Host Scan
Uninstalling Host Scan package removes it from view on the ASDM interface and prevents the ASA
from deploying it even if Host Scan or CSD is enabled. Uninstalling Host Scan does not delete the Host
Scan package from the flash drive.
Prerequisites
Log on to the ASA and enter global configuration mode. In global configuration mode, the ASA displays
this prompt: hostname(config)#.
Detailed Steps
Command
Step 1
webvpn
Example:
hostname(config)# webvpn
Step 2
no csd enable
Example:
ASAName(webvpn)#no csd enable
Step 3
no csd hostscan image path
Example:
hostname(webvpn)#no csd hostscan image
disk0:/hostscan-3.6.0-k9.pkg
hostname(webvpn)#no csd hostscan image
disk0:/anyconnect-NGC-win-3.0.0327-k9.pkg
Step 4
write memory
Example:
hostname(webvpn)# write memory
Assigning AnyConnect Feature Modules to Group Policies
This procedure associates AnyConnect feature modules with a group policy. When VPN users connect
to the ASA, the ASA downloads and installs these AnyConnect feature modules to their endpoint
computer.
Purpose
Show the version of Host Scan enabled on the ASA.
Purpose
Enter webvpn configuration mode.
Disables the Host Scan image you want to uninstall.
Specifies the path to the Host Scan image you want to
uninstall. A standalone Host Scan package or an
AnyConnect Secure Mobility Client package may have
been designated as the Host Scan package.
Saves the running configuration to flash.
After successfully saving the new configuration to flash
memory, you receive the message [OK].
Cisco ASA Series CLI Configuration Guide
Installing and Enabling Host Scan on the ASA
1-5