Protection from unauthorized access
6.3 Disabling HiDiscovery function
6.3 Disabling HiDiscovery
function
6.3.1 Description HiDiscovery protocol
The HiDiscovery protocol (see
"Entering the IP parameters via HiDiscovery"
on page
35) allows you to assign an IP address to the Switch on the basis of
its MAC address. HiDiscovery is a layer 2 protocol.
Note: For security reasons, either limit or switch off completely the HiDisco-
very function of the Switch after assigning the IP parameters.
Basic - L3P
82
Release 3.1 06/07