Loading The Software From The Aca; Swapping The Software Available - Hirschmann Power MICE User Manual

Loading Software Updates
4.1 Loading the Software from
the ACA
Like an usual USB stick, you can also connect the ACA 21-USB to an USB
port of your PC and copy the Switch software to the main directory of the
ACA 21-USB.
V Connect the ACA 21-USB, to which you have copied the Switch software,
to the USB port of the Switch.
V Open the system monitor. (see
16).
V Select 2, and press the ENTER key to copy the software from the
ACA 21-USB into the local memory of the Switch.
On concluding the update, the System Monitor prompts you to press any
key to continue..
V Select 3 to start the new software on the Switch.
In addition, the system monitor features further options in connection with
your Switch software:
D
Swapping the software images available
D
Starting the software,
D
Performing a cold start.

4.1.1 Swapping the software available

In this menu item of the system monitor you select one of two possible
software releases that you want to load.
The following window appears on the screen:
Basic - L3P
Release 3.1 06/07

4.1 Loading the Software from the ACA

"Opening the system monitor" on page
63