3.2 Mechanical Installation
Follow the steps in
Step
Check probe dimensions and strength.
1
Trim probe to correct length.
2
Attach/assemble the probe to the process connector.
3
Attach centering disk to probe if applicable.
4
Mount the transmitter.
5
Rotate electronic housing to desired view angle (on
6
models with optional display).
Secure the probe.
7
Install conduit entry plugs and adapters.
8
Check for correct probe dimensions and strength
Measure for correct probe length and check that your probe is within tensile or bending
load limits. See section
See Table 3-14: Probe length for different probe types
Accuracy and measuring range specifications
See section
2.4.3
Page 38
Table 3-2.
See Section
Table 3-2: Mechanical installation sequence
Action
3.2.2.1
for details.
SLG 700 SmartLine Level Transmitter User's Manual
3.3.1
for wiring and configuration steps.
See Section
3.2.1
3.2.3
3.2.4
0
3.2.6 & 3.2.7
3.2.11
3.2.12
3.2.13
Revision 8