Menu Navigation; Data Entry; Table 4-1: Three-Button Option Functions - Honeywell SmartLine SLG 700 User Manual

Physical
Button

Left

Center

Right

Menu Navigation

When on a lower level menu, return to the menu above by selecting <Return>.
Alternately, the (up) and (down) buttons can be pressed simultaneously to return to the
menu above. When on the highest level menu, or when using the basic display menu,
pressing the (up) and (down) buttons simultaneously will exit the menu and return to the
PV display.
Use the  and  buttons to scroll through the list of menu items. Use the
select an item for data entry or activation. When a selection or activation is performed,
this calls up a pop-up window (Advanced Display) to allow editing. No action is taken
against a menu item until the
If you press
seconds or the data entry will time out and the original value of the parameter will be
preserved.
If no button presses occur within 60 seconds, menu access will time out and the
transmitter will exit the menu and return to the PV display.

Data Entry

Data entry is performed from left to right. Select a character / digit by pressing  or 
buttons, and then press
the cross-hatch character
space character, just press
All numeric entries are clamped at the low or high limit if needed. To show the low and
high limit for a parameter, put the cursor over the left-most digit, select either the ▲ or
▼ character and press
Revision 8

Table 4-1: Three-Button Option Functions

Advanced
Display
Scroll to previous menu item in an active list.
Increment
Scroll through alphanumeric list to desired character (ex.
Move cursor Up
for entering Tag names or numeric values)
Scroll to next menu item in an active list.
Decrement
Scroll through alphanumeric list to desired character (ex.
Move cursor Down
for entering Tag names or numeric values)
Call up the Main Menu.
Call up a lower-level menu.
Enter Select an item for data entry.
Confirm a data entry operation
Activate the service associated with a selected menu item.

button is pressed.

button to begin data entry, you must press another button within 10

to advance to the next character position to the right. Select
▒
to terminate the entry or if the final character is already a

again.

button.
SLG 700 SmartLine Level Transmitter User's Manual
Action

button to
Page 99