Editing A Numeric Value; Selecting A New Setting From A List Of Choices; Table 4-2: Three-Button Data Entry - Honeywell SmartLine SLG 700 User Manual

Screen
Symbol
▲
▼
▒
0 thru 9,
Minus,
Decimal
A thru Z, 0
thru 9 special
symbols

Editing a Numeric Value

Editing a numeric value is a digit-by-digit process, starting with the left-most digit.
1. Press
2. The Advanced Display will show the current value of the item in a pop-up
window in the middle of the screen
3. Press the  or  buttons to select the desired digit and then press
the next digit to the right.
4. After the last digit has been entered, press  to write the new value to the
transmitter.

Selecting a new setting from a list of choices

To select a new setting for parameters that presents a list of choices (for example,
Screen Format or Display Units.):
1. Press
2. The Advanced Display shows the current setting of the item in a pop-up
window.
3. Press  or  to scroll through the list of choices.
4. Press
transmitter and will be displayed on the lower line, right justified.
Page 100

Table 4-2: Three-Button Data Entry

Numeric data entry
Display the high limit for this parameter.
This symbol only appears in the left-most
position of the data entry field.
Display the low limit for this parameter.
This symbol only appears in the left-most
position of the data entry field.
Terminate the numeric entry
These characters are used to enter
numeric values. The minus sign only
appears in the left-most digit.
Not Available

to begin.

to begin.

to make your selection. The new selection will be stored in the
SLG 700 SmartLine Level Transmitter User's Manual
Text entry
Not Available
Not Available
Terminate the text entry
These characters can be
used to create custom
tags and unit labels
These characters can be
used to create custom
tags and unit labels

to advance to
Revision 8