Figure 3-41: Anchoring Wire Probes; Figure 3-42: Wire Probe Slack - Honeywell SmartLine SLG 700 User Manual

Figure 3-41: Anchoring wire probes

When anchoring, a wire probe it is recommended that the wire be slack to prevent
excessive tensile loading from motion of medium and/or thermal expansion. The sag
should be ~1cm/m (1.5"/10') of the probe length. See Figure 3-42.

Figure 3-42: Wire probe slack

SLG 700 SmartLine Level Transmitter User's Manual
Revision 8 Page 87