Honeywell SmartLine SLG 700 User Manual page 122

Process
Measurement
Page 106
<Return>
Single Liquid
2 Liq Flooded
Measured Prod
2 Liq NonFlood
Saturated Steam
SingleLiqLowDC
Vapor DC
###.###
Product DC
Upper Prod DC
###.###
Lower Prod DC
###.###
Vapor Atten
Product Atten ###.###
Lower Prod Atten ###.###
Upper Prod Atten ###.###
###.###
Max Fill Rate
<Return>
Sensor Height
Max Product Level ###.###
Level Offset
Echo Lost Time ###.###
SLG 700 SmartLine Level Transmitter User's Manual
Select the Measured
Product from the List
Applicable for single and
two liquids, non-flooded
only. If its value greater
than UP/LP DC Warning
message will be
displayed
Applicable only for solid
and single liquid
measured products.
If its value is less than
Vapor DC, a warning
message will be
displayed
Applicable only for two
liquid measured
products.
If its value is less than
Vapor DC or greater
than LP DC a warning
message will be
displayed
Applicable only for two
liquid measured
products.
If LP DC - UP DC <10 a
Warning message will be
displayed
Applicable for single and
two liquids, non-flooded
only. Attenuation of
vapor.
Attenuation of product,
single liquids only
Attenuation of lower
product, two liquids only
Attenuation of upper
product, two liquids only
Maximum rate of filling or
emptying.
Range 0 to 100m
Range -100 to 100m
Time in seconds until a
PV Bad fault occurs after
the echo is no longer
detected.
Press  to
enter
menu
selection,
 and  to
select
from list, 
to enter
Press  to
enter
menu
selection,
 and  to
select
from list, 
to enter
Press  to
enter
menu
selection,
 and  to
select
from list, 
to enter
Revision 8