Injection Pump / Hp Pump; Hp Fuel Pump - Filling With Engine Oil - MTU 12V4000M*3 series Operating Instructions Manual

8.6 Injection Pump / HP Pump

8.6.1 HP fuel pump – Filling with engine oil
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 10–60 Nm
Fuel suction device
Engine oil
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
Liquid or gaseous media, e.g. fuel, are poisonous.
Escaping vapors of highly volatile media, e.g. fuel or ether.
Risk of fatal injury through swallowing; risk of poisoning through inhalation; irritation to eyes
and skin!
• Seek medical attention immediately; do not induce vomiting.
• Do not inhale vapors or mist.
• Wear protective clothing, protective gloves, and safety glasses.
• If contact is made with skin, wash off with water and soap.
WARNING
Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.
NOTICE
HP fuel pump not filled with engine oil.
Damage to components, major material damage!
• Ensure that th HP fuel pump is filled with engine oil before it is installed or put into operation.
NOTICE
Contaminated components.
Risk of damage to component!
• Check components for special cleanliness and clean if necessary.
MS15036/00E 2018-08 | Injection Pump / HP Pump | 253
Part No. Qty.
F30452769 1
F30378207 1