Crankcase Breather - Oil Mist Separator Replacement - MTU 12V4000M*3 series Operating Instructions Manual

8.4.2 Crankcase breather – Oil mist separator replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Engine oil
Oil mist separator
O-ring
WARNING
Oil is hot.
Oil can contain residue/substances which are harmful to health.
Risk of injury and poisoning!
• Allow the product to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves and goggles/safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Oil mist separator – Replace-
ment
1. Remove screws (1) and take off together with
retainer (2).
2. Replace oil mist separator (3).
3. Replace O-ring (4) if necessary.
4. Replace further oil mist separators in the
same way.
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
MS15036/00E 2018-08 | Crankcase Breather | 247
Part No. Qty.