Engine Coolant Filter - Replacement - MTU 12V4000M*3 series Operating Instructions Manual

8.16.8 Engine coolant filter – Replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Filter wrench
Engine oil
Engine coolant filter
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
Engine coolant filter – Replace-
ment
1. Remove locking device (1).
2. Close shut-off cock (3).
3. Remove engine coolant filter (2) with filter
wrench.
4. Clean sealing surface on connecting piece.
5. Coat seal on new engine coolant filter (2)
with engine oil.
6. Screw on engine coolant filter (2) and tighten
hand-tight.
7. Open shut-off cock (3).
8. Install locking device (1).
322 | Coolant Circuit, General, High-Temperature Circuit | MS15036/00E 2018-08
Part No.
F30379104
(→ Spare Parts Catalog)
Qty.
1