MTU 12V4000M*3 series Operating Instructions Manual page 292

Final steps – Vertical air intake
1. Install compressor casing (2).
2. Tighten screws (1) to specified torque using a torque wrench.
Name
Screw
3. Install coolant ventilation line and coolant lines on compressor housing.
4. Install intake housing (3) with actuating cylin-
der (2).
5. Align clamp (1) and tighten to specified torque using a torque wrench.
Name
Clamp
290 | Exhaust Turbocharger | MS15036/00E 2018-08
Size Type
Tightening torque
Size Type
Tightening torque
Lubricant Value/Standard
(Engine oil) 20 Nm + 2.5 Nm
Lubricant Value/Standard
15 Nm + 2 Nm