8.1.3 Installation locations for SOLAS shielding
General information
Primarily fit SOLAS shielding as per MTN 5233 (→ Page 228).
Shield unions with adhesive tape if SOLAS shielding as per MTN 5233 is not possible (→ Page 237).
When affixing adhesive connections ensure that escaping fluid can flow out without pressure (→ Page 237).
Fuel system, fuel lines with fuel pressures exceeding >1.8 bar
Item
1 *
* This shield must be installed on the assembly line. This location is no longer accessible, or only with great
difficulty, following assembly of the air pipework and/or fuel filters.
230 | SOLAS | MS15036/00E 2018-08
Type of shielding
Installation location
Shield A8
After LP fuel pump