Ethernet Oam Monitoring; Introduction; Accessing The Ethernet Oam Monitoring Menu; Ethernet Oam Monitoring Commands - Teldat Dm709-I User Manual

10 Ethernet OAM Monitoring

Chapter 10 Ethernet OAM Monitoring

10.1 Introduction

Describes the available commands to monitor the OAM Ethernet protocol. It includes the following two sections:
• Accessing the OAM protocol monitoring menu in an Ethernet interface.

• Ethernet OAM monitoring commands.

10.2 Accessing the Ethernet OAM monitoring menu

Access OAM monitoring through the monitoring menu for the Ethernet interface, associated through oam , as shown
in the following example.
Example:
*monitor
Console Operator
+network ethernet0/1
-- Ethernet Console
ethernet0/1 ETH+oam
-- Ethernet OAM interface monitor --
ethernet0/1 OAM monitor+
10.3 Ethernet OAM monitoring commands
The following table details the various monitoring commands available for the Ethernet OAM. Each command is de-
scribed in detail further down.
Command

? (HELP)

CLEAR

LIST
REMOTE-LOOPBACK
EXIT
10.3.1 ? (HELP)
Displays all the available commands and their options.
Syntax:
ethernet0/1 OAM monitor+?
Example:
ethernet0/1 OAM monitor+remote-loopback ?
start Initiate loopback mode on remote client
stop Terminate loopback mode on remote client
10.3.2 CLEAR
Deletes the OAM protocol statistics in the Ethernet interface being monitored.
Syntax:
ethernet0/1 OAM monitor+clear statistics
Example:
ethernet0/1 OAM monitor+clear statistics
ethernet0/1 OAM monitor+
96
--
Function
Displays the available commands and their options.
Deletes the OAM statistics for the Ethernet interface being monitored.
Displays information on the state of the Ethernet OAM protocol.
Loopback control commands in the remote OAM client.
Exits the Ethernet OAM monitoring menu.
Teldat SA
LAN Interfaces