Do you have a question about the IC-V86 and is the answer not in the manual?
Questions and answers
Joh Holland
January 27, 2025
I bought this thinking it was a simple ship to shore to call bridges on the ICVW. How do I call on for example, Channel 9?
1 comments:
Mr. Anderson
February 10, 2025
To call on Channel 9 using the Icom IC-V86, follow these steps:
1. Turn on the transceiver. 2. Push [VFO/MR/CALL] several times to select the memory mode. 3. Use [Y] or [Z] to navigate to Channel 9. 4. Press and hold the Push-To-Talk (PTT) button to transmit. 5. Release the PTT button to listen.
Need help?
Do you have a question about the IC-V86 and is the answer not in the manual?
Questions and answers
I bought this thinking it was a simple ship to shore to call bridges on the ICVW. How do I call on for example, Channel 9?
To call on Channel 9 using the Icom IC-V86, follow these steps:
1. Turn on the transceiver.
2. Push [VFO/MR/CALL] several times to select the memory mode.
3. Use [Y] or [Z] to navigate to Channel 9.
4. Press and hold the Push-To-Talk (PTT) button to transmit.
5. Release the PTT button to listen.
This will allow you to call on Channel 9.
This answer is automatically generated