INTRODUCTION
Thank you for choosing this Icom product. This
product was designed and built with Icom' s state of
the art technology and craftsmanship. With proper
care, this product should provide you with years of
trouble-free operation.
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
before using the transceiver.
SAVE THIS INSTRUCTION MANUAL — This
instruction manual contains advanced operating
instructions for the IC-V86. For basic operating
instructions, see the BASIC MANUAL.
FEATURES
z Rugged construction (IP54* and MIL-STD-810G)
z Powerful 7.0 W of output power (Extra High power)
z Extend Battery Life function (With the BC-240)
* Only when the battery pack or case, antenna, and jack
cover are attached.
Icom, Icom Inc. and the Icom logo are registered
trademarks of Icom Incorporated (Japan) in Japan,
the United States, the United Kingdom, Germany,
France, Spain, Russia, and/or other countries.
All other products or brands are registered trademarks
or trademarks of their respective holders.
Icom is not responsible for the destruction, damage
to, or performance of any Icom or non-Icom
equipment, if the malfunction is because of:
• F orcemajeure,including,butnotlimitedto,fires,
earthquakes,storms,floods,lightning,other
natural disasters, disturbances, riots, war, or
radioactive contamination.
• The use of Icom transceivers with any equipment
that is not manufactured or approved by Icom.
i
Need help?
Do you have a question about the IC-V86 and is the answer not in the manual?
Questions and answers
I bought this thinking it was a simple ship to shore to call bridges on the ICVW. How do I call on for example, Channel 9?
To call on Channel 9 using the Icom IC-V86, follow these steps:
1. Turn on the transceiver.
2. Push [VFO/MR/CALL] several times to select the memory mode.
3. Use [Y] or [Z] to navigate to Channel 9.
4. Press and hold the Push-To-Talk (PTT) button to transmit.
5. Release the PTT button to listen.
This will allow you to call on Channel 9.
This answer is automatically generated