Setting Skip Channels; Scan Resume Setting - Icom IC-V86 Advanced Manual

6
SCAN OPERATION

Setting skip channels

The Memory Skip function speeds up scanning by
not scanning those memory channels set as skip
channels. Set skip channels as follows.
1. Push [VFO/MR/CALL] several times to select the
memory mode.
2. Push [Y] or [Z] to select the memory channel to
be skipped.
3. Push [FUNC], and then push [SKIP] to set the
channel as a skip channel.
• "SKIP" is displayed.

Scan resume setting

Various pause and timer options can be selected with
the Scan Resume function. The selected resume
option is also used for Priority Watch.
1. Push [FUNC], and then push [SET] to enter the
Set mode.
2. Push [Y] or [Z] to select the scan pause timer
item (SCt, or SCP).
3. Rotate [VOL] to select the desired scan resume
option.
• "SCt. 5/10/15": Timer scan
The scan pauses for 5 to 15
seconds, when a signal is
received.
• "SCP. 2": Pause scan
The scan pauses, then resumes
2 seconds after the signal
disappears.
4. Push [# ENT] to exit the Set mode.
Example: Setting memory channel 11 as the
skip channel.
Push or to select channel 11.
Push , and push
Displayed
The "Scan pause timer" item in the Set mode
(Pause scan is selected.)
(Timer scan (15 seconds) is selected.)
6-3
.