Table of Contents
Advertisement
2
BATTERY CHARGE
Optional battery case (BP-263)
When using the battery case (BP-263), install 6 × AA
(LR6) size alkaline batteries, as described below.
Remove the battery case, if it is attached. (p. 1-3)
Install 6 × AA (LR6) size alkaline batteries.
Install only alkaline batteries.
Be sure to observe the correct polarity.
Attach the battery case. (p. 1-3)
CAUTION:
• When installing batteries, make sure they are all
the same brand, type and capacity. Also, do not
mix new and old batteries together.
• Keep battery terminals clean. It's a good idea to
occasionally clean them.
• Never incinerate used battery cells since the
internal battery gas may cause them to rupture.
• Never expose a detached battery case to water.
If the battery case gets wet, be sure to wipe it dry
before using it.
• Never use batteries whose insulated covering is
damaged.
BE CAREFUL! The negative
terminals of the battery case
protrude from the body, so
pay attention not to injure your
fingerswheninsertingthe
batteries.
2-4
- Quick Links:
- Transmitting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-V86 and is the answer not in the manual?
Questions and answers
I bought this thinking it was a simple ship to shore to call bridges on the ICVW. How do I call on for example, Channel 9?
To call on Channel 9 using the Icom IC-V86, follow these steps:
1. Turn on the transceiver.
2. Push [VFO/MR/CALL] several times to select the memory mode.
3. Use [Y] or [Z] to navigate to Channel 9.
4. Press and hold the Push-To-Talk (PTT) button to transmit.
5. Release the PTT button to listen.
This will allow you to call on Channel 9.
This answer is automatically generated