Table of Contents
Advertisement
11
RESETTING
Resetting
The LCD may occasionally display erroneous
information(Example:whenfirstapplyingpower).This
may be caused externally by static electricity or by
other factors.
D All reset
The all reset clears all programming and returns all
settings to their factory defaults.
1. Hold down [ ] for 1 second to turn OFF the
transceiver.
2. While holding down [MONI] and [VFO/MR/CALL],
hold down [ ] for 1 second to turn ON the power.
• "CLEAR" is displayed when the transceiver is totally
reset.
CAUTION: The All reset returns all programmed
contents to their default settings.
11-2
- Quick Links:
- Transmitting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-V86 and is the answer not in the manual?
Questions and answers
I bought this thinking it was a simple ship to shore to call bridges on the ICVW. How do I call on for example, Channel 9?
To call on Channel 9 using the Icom IC-V86, follow these steps:
1. Turn on the transceiver.
2. Push [VFO/MR/CALL] several times to select the memory mode.
3. Use [Y] or [Z] to navigate to Channel 9.
4. Press and hold the Push-To-Talk (PTT) button to transmit.
5. Release the PTT button to listen.
This will allow you to call on Channel 9.
This answer is automatically generated