S535 Wafer Acceptance Test System Administrative Guide
Power and operating conditions
The following topics contain information about power and operating environment conditions.
Supplied power cords
Keithley Instruments provides power cords that match the power requirements of the system. The
following figure and table describe these cords.
If power cords with different cord ends are needed, you must provide those cords.
S535-924-01 Rev. B / January 2019
Figure 24: Supplied power cables
Number
1
2
3
Section 2: S535 site preparation and installation
Description
20 A, 125 V American
15 A, 125 V American
16 A, 250 V Eurostyle cord
2-19