Keithley S535 Administrative Manual page 13

Section 2: S535 site preparation and installation S535 Wafer Acceptance Test System Administrative Guide
Also, check the "TIP N TELL" indicator to ensure that the crate has not been tipped over (see the
following figure).
Figure 3: S535 crate tipping indicator
Carefully remove all system components from the crate. While unpacking, make sure there is no
component damage. Report any damage to the shipping agent immediately. Please reuse or recycle
packaging materials in accordance with your local requirements.
You need at least two people to unpack and move the S535 system cabinet.
S535-924-01 Rev. B / January 2019
2-4