Ingredient Dispenser - VKI Technologies Suprema Operation And Service Manual

SUPREMA - OPERATION & SERVICE MANUAL
Removing the Ingredient Dispenser
1. Switch off the power to the machine.
2. Remove the brewer.
3. Slide the water tank outward. The water tank wrap supports the right side of the
ingredient dispenser base
4. Release the ingredient dispenser bracket support on the left wall of the cabinet.
a) Remove the screw securing the bracket to the left wall of the cabinet.
b) Rotate the support backwards until it is horizontal. The ingredient dispenser will
5. Raise the ingredient dispenser lid on top of the coffee maker.
6. Remove the ingredient dispenser.
Installing the Ingredient Dispenser
1. Position the drive pins of the motor so they are all vertical.
2. Position the drive couplings of the ingredient dispenser so that they are vertical.
3. Place the ingredient dispenser on the ingredient dispenser bracket.
a) Make sure the ingredient lid is up and the ingredient dispenser couplings and motor
4. Slide the water tank forward. The water tank wrap supports the right side of the
ingredient dispenser base.
5. Secure the bracket support on the left wall of the cabinet.
a) Rotate the bracket support on the left wall of the cabinet forward so that it lifts the
6. Replace the brewer.
7. Switch the coffee maker "ON".
8. Close the ingredient dispenser lid.
Suprema - Operation & Service
now drop.
drive pins mate.
ingredient dispenser base, and secure with a screw.
02-2012 Page 49 of 58