Press-Hold Hot Water; Temperature - VKI Technologies Suprema Operation And Service Manual

SUPREMA - OPERATION & SERVICE MANUAL
"Press-Hold" Hot Water Setting
Hot water can be programmed to be dispensed in one of two ways. With this feature set to
" ", if hot water is selected and the "
OFF
with hot water. For example, if a large cup of hot water is selected, the quantity of hot water
programmed for that cup size (in the "
is switched to "
hot water button is kept pressed. Releasing the button will stop the flow of hot water.
1. To set the "
menu scroll buttons and scroll until the following message appears,

Note:
If this setting is
switched " ", it is
ON
not possible to set a
price for hot water. If
switched " ", a
OFF
price can be set.
Setting the Temperature
1. To set the temperature of the water in the tank, scroll the menu that reads,

Tip:
To toggle between
Fahrenheit and
Celsius, press the
" " button
LARGE CUP
while in the "
SET
" menu.

TEMPERATURE

Setting the "
Suprema - Operation & Service
" and hot water is selected, hot water will only be dispensed as long as the
ON
-
PRESS HOLD HOT WATER
a) Press the " " button to enter the set mode.
START
b) Using the " " hidden setting adjustment button ONLY, select "
DOWN
a) Press the " " button. The bottom row of the display will now indicate the
START
currently programmed temperature setting.
b) Using the hidden setting adjustment buttons, increase or decrease the temperature
for the water tank.
c) When programmed, this will be the maximum temperature to which the water will
heat. Once the water has reached this temperature, the heater will switch off.
" Warning Message
WARMING UP
a) Press the "
START
" on/off" menu.
MESSAGES
b) Press " " to enter this menu, and scroll to the "
START
message by pressing the "
c) This message can be set to "
message is set to "
the temperature in the tank drops about 20° F, and the unit will no longer
function until the temperature gets back to its proper operating range. Set to
" - ", the message will appear on the display, but the unit will
ON PASSIVE
continue to function normally.
" button is pressed, the cup will completely fill
START
" mode) is dispensed. However, if this feature
SET WATER
" setting, press the "
PRESS-HOLD WATER
PRESS <START>
SET TEMPERATURE
PRESS <START>
" button to get back to the main menu, and scroll to the
" button.
START
– ", "
ON ACTIVE
- ", the "
ON ACTIVE WARMING UP
02-2012
" button on the hidden
UP
" or "
ON
TEMP IS TOO LOW
- " or " ". If the
ON PASSIVE OFF
" message will appear after
Page 25 of 58
".
OFF
"