VKI Technologies Suprema Operation And Service Manual page 35

SUPREMA - OPERATION & SERVICE MANUAL
Downloading Software Updates Using the VKI Data Link
4. Select the function required on the Data Link.
5. Press the "
6. The program will now download automatically. The downloading procedure will
take approximately three minutes
7. Remove the DB9 cable and Data Link phone jack harness.
8. Reconnect the coin changer phone jack harness to the front board and close the
inner and outer doors.

Note:
If the "
INCORRECT
" LED is lit
EPROM
on the Data Link, it
indicates that the
software being
downloaded is not
compatible with
the rear board in
the equipment.
Check the software
level printed on the
decal.
EPROM
Also note that if the
is not inserted
EPROM
properly into the
socket, all the LED's
on the Data Link will
illuminate.
Suprema - Operation & Service
a) When first powered up, both the "
FACTORY SETTINGS
active.
b) For downloading the program, without changing the software settings, press the
"
DOWNLOAD FACTORY SETTINGS
function. At this point, only the power LED and the "
should be lit on the Data Link. Once activated, the Data Link will only update the
software, leaving the product settings, water settings, pricing, etc., unchanged from
what was previously programmed.
c) To download the software update, and change all the values to factory settings,
both the "
DOWNLOAD PROGRAM
should be lit, indicating that both of these functions are active.
" button on the Data Link to activate the downloading procedure.
START
WARNING:
Do not interrupt this procedure once it is in progress as data
being transferred may become corrupted, creating problems with the
operation of the coffee machine.
DOWNLOAD PROGRAM
" LED's will be lit, indicating that both these functions will be
" button to switch off it's LED, disabling this
" and "
DOWNLOAD FACTORY SETTINGS
02-2012
(continued)
" and "
DOWNLOAD
" LED
DOWNLOAD PROGRAM
" LED's
Page 35 of 58