VKI Technologies Suprema Operation And Service Manual page 37

SUPREMA - OPERATION & SERVICE MANUAL
Step 2 – Transferring Settings From the Data Link to the Suprema
Step 3
If multiple Suprema coffee makers require the same custom message to be displayed,
this too can be transferred from one unit to several others. Simply program the custom
message on the first unit, and perform STEP 1 on the previous page (Transferring
Settings to the Data Link Device). Once done, follow the procedure outlined below.
This procedure will transfer ONLY the custom message. Please note, however, that
performing STEP 2 (above) will transfer all settings, including custom messages.
Suprema - Operation & Service
1. Connect the Data Link phone jack harness to the free connector on the
back of the front board.
2. Press the " -
SET UP
a) The following message will appear on the display,
3. Press the "
START
a) A list of options to be transferred will then appear on the display. The
first option is "
" " the settings. If the "
ALL
" " to get to the next option, and repeat as necessary. We
START
recommend that the "
conflicts in the set-up.
– Transferring a Custom Message to a Suprema
(optional)
1. Connect the Data Link phone jack harness to the free connector on the
front board.
2. Press the " -
SET UP
a) The following message will appear on the display,
3. Press the bottom scroll button to the right of the "
a) The following message will appear on the display,
4. Press the "
START
a) The custom message in the Data Link device will now be transferred to
the Suprema "
" button on the back of the front board.
COPY DATA LINK
TO SET-UP
" button on the Suprema front selection panel.
– - " (defaulted to "
COPY ALL SET UP
" button is pressed, "
UP
" option be used to prevent any possible
ALL
" button on the back of the front board.
COPY DATA LINK
TO SET-UP
COPY CUSTOM MSG.
TO SET-UP
" button on the Suprema front selection panel.
- ".
SET UP
02-2012
") will transfer
YES
" will appear. Press
NO
" button twice.
START
Page 37 of 58