Default Setting; Top Pause - VKI Technologies Suprema Operation And Service Manual

Hot beverage system
Table of Contents

Advertisement

SUPREMA - OPERATION & SERVICE MANUAL
Setting the Default
1. To program the default settings, press the "
buttons and scroll until the following message appears,
Setting the Top Pause
The "

TOP PAUSE

When the piston reaches top dead center in the cylinder, the brewer will pause for the amount
of time set in this menu, to allow the coffee and water to steep (mix together). The higher the
"
TOP PAUSE
1. To set the "
buttons and scroll until the following message appears,
Note:
The minimum "
TOP
" setting is
PAUSE
2.0 seconds.
Suprema - Operation & Service
a) Press the "
" button to enter the set mode.
START
b) The LED's that correspond to the current default setting will now be illuminated.
c) To change the default, press the buttons on the selection panel for the new default
settings. The LED's that are illuminated will now become the new default settings.
d) In no default is set, the LED's on the selection panel will light and scroll until the
user selects one. This applies for the products, strengths, and cup sizes, therefore
three selections will be required by the user.
e) To exit the "
SET DEFAULT
"
" scroll buttons.
DOWN
" occurs when the brewer is at top dead center, and is before the regular pause.
" is set to, the stronger the cup of coffee that is brewed by the equipment.
" setting, press the "
TOP PAUSE
a) Press the "
" button to enter the set mode.
START
b) At this point, select the cup size by pressing the appropriate buttons on the
selection panel. The "
that is illuminated.
c) Using the hidden setting adjustment buttons, increase or decrease the timing for the
"
".
TOP PAUSE
d) To exit the "
SET TOP PAUSE
or "
" scroll buttons.
DOWN
" button on the hidden menu scroll
UP
SET DEFAULT
PRESS <START>
" mode and proceed to the next setting, press the "
" button on the hidden menu scroll
UP
SET TOP PAUSE
PRESS <START>
" setting displayed will correspond to the cup size
TOP PAUSE
" mode and proceed to the next setting, press the "
02-2012
" or
UP
"
UP
Page 19 of 58

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for VKI Technologies Suprema

Table of Contents