Total Counter Reset & Access Code; Set-Up Mode - VKI Technologies Suprema Operation And Service Manual

SUPREMA - OPERATION & SERVICE MANUAL
Total Counter Reset
This software contains a special access code that enables the service person to reset all the
counters to zero, including the "
before a unit is re-installed in the field.
1. To perform a "
a) Switch the power to the coffee maker "
b) Press the "
c) With "
d) The following message will now appear on the display,
e) Enter the "
" Total Counter Reset " Access Code
The following is the factory preset "
in the sequence outlined below;
Once the access code has been entered, a counter will appear on the top left of the display, and
will quickly increment from 0 to 255. When the reset is complete, the unit will automatically
exit to the "standby" mode, and the internal light will remain "
necessary to press the "
Page 14 of 58
VEND TOTAL
TOTAL COUNTER RESET
- " mode button on the inside door panel and keep it depressed.
SET UP
- " mode button pressed, switch power to coffee maker "
SET UP
ENTER ACCESS
CODE:
TOTAL COUNTER RESET
TOTAL COUNTER RESET
1 COFFEE
2 MILD STRENGTH
3 LARGE CUP
4 MEDIUM CUP
5 SMALL CUP
" button for the brewer to cycle to re-establish its home position.
START
02-2012
" counter. This operation should be performed
",
" (switch is at the rear of the unit).
OFF
" access code (described below).
" access code - press the following
" temporarily. It is now
ON
Suprema - Operation & Service
".
ON