Table of Contents
Advertisement
SUPREMA - OPERATION & SERVICE MANUAL
MESSAGE
SELECT – THEN
PRESS <START>
TANK IS FILLING
PLEASE WAIT
TANK OVERFLOW!
OPEN AND DRY CATCH
WATER OVERFLOW
EMPTY & DRY CATCH
Page 40 of 58
POSSIBLE CAUSE
Coffee maker is in
"standby"
Indicates that the water tank has not yet
been filled with water.
The rear overflow catch may be full of
water.
The front overflow catch may be full of
water or coffee.
02-2012
CORRECTIVE ACTION
None required.
mode.
Please wait a few minutes for the tank to
fill. If it takes too long, a "
WATER SOURCE
Clean and dry the tank overflow catch.
Verify the water level probes. They may
be covered with lime or scale. Clean the
probes or delime the water tank
components.
Inlet valve may be leaking, constantly
allowing water to enter the tank. Replace
the inlet valve.
Water in the tank may be boiling. Turn
temperature down to 185-195 °F.
If message cannot be cleared, rear
board may be wet. Replace the board
and let the wet one dry overnight.
Clean and dry the front overflow catch.
The cup stand may be full of liquid.
Empty and clean cup stand and catch.
The hot water valve may be leaking.
Repair or replace hot water valve.
If the message cannot be cleared, the
rear board may be wet. Replace the
board and let the wet one dry overnight.
PLEASE CHECK
" message will appear.
Suprema - Operation & Service
Hide quick links:
Advertisement
Table of Contents
