Ratings; Hardware Compatibility - DSC LE4000 Installation Manual

Lte universal wireless alarm communicator
Hide thumbs Also See for LE4000:
Table of Contents

Advertisement

Table 2: LTE Frequency Bands (model LE2077 only)
Band
LTE B2
LTE B4
LTE B5
LTE B12
LTE B13
UMTS B2
UMTS B5
R
ATINGS
Table 3: Communicator Electrical Ratings
Model
Input Voltage
Current Consumption
Standby Current (@ 3.7V)
Alarm (Transmitting) Current)
Dual band Antenna
Operating Temperature
Humidity
Board Dimensions (mm)
Weight (grams)
H
C
ARDWARE
OMPATIBILITY
Table 4: Compatibility
Communicator
LE2077
Note for ULC Listed installations:
Products or components of products, which perform communications functions only, must
comply with the requirements applicable to communications equipment as specified in CAN/
CSA –C22.2 No. 60950-1, Information Technology Equipment-Safety - Part 1: General
Requirements. Where network interfaces, such as the following, are internal to the subscriber
control unit or receiver, compliance to CAN/CSA –C22.2 No. 60950-1 is adequate. Such
components include, but are not limited to: Hubs; Routers; Network interface devices; Third
party communications service providers; Digital subscriber line (DSL) modems; and Cable
modems.
Note for UL Listed installations:
Packet switched data network interface equipment, manufactured by other than the burglar
alarm equipment manufacturer, that is not required for the processing of the signals must be
evaluated to the applicable requirements of the Standard for Information Technology
Equipment – Safety – Part 1: General Requirements, UL 60950-1, either as burglar alarm
equipment or communication equipment.
Transmit Band (TX)
1850 MHz to 1910 MHz
1710 MHz to 1755 MHz
824 MHz to 849 MHz
698 MHz to 716 MHz
777 MHz to 787 MHz
1850 MHz to 1910 MHz
824 MHz to 840 MHz
Power Supply Ratings
3.5 / 3.9 / 4.2 VDC (min / NOM / MAX) from
the SCW9055/SCW9057 panel
400 mA @ 3.7V during transmission
Antenna Specifications
Environmental Specifications
0°C - 49°C (32°F- 120°F)
5% ~ 85% relative humidity, non-condensing
Mechanical Specifications
Receiver/Control
Panel
Receiver
Control Panel
LE2077
Cellular Only
75 mA
75 mA
See Table 1
109 x 110
60
Description
SG System I, v1.14+
SG System II, v2.11+
SG-DRL3-IP, v2.3+
SG-DRL4-IP, v1.2+
SG-DRL5-IP, V1.0+
SCW9055/SCW9057 V1.17/1.18
5
Receive Band (RX)
1930 MHz to 1990 MHz
2110 MHz to 2155 MHz
869 MHz to 894 MHz
728 MHz to 746 MHz
746 MHz to 756 MHz
1930 MHz to 1900 MHz
824 MHz to 894 MHz

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents