DSC LE4000 Installation Manual page 17

[029] Cellular 2 Transmission
Default (00)
Program 00 to disable this event transmission or FF to enable. See System Test Options
(above) for details on settings.
NOTE: The time interval (in minutes) between periodic tests is programmed in section [225]
(Cellular).
[030] FTC Restore
Default (FF)
Program 00 to disable this event transmission or FF to enable. This event occurs when an FTC
Trouble on the system restores.
[031] Priority Tamper Alarm
Program 00 to disable this event or FF to enable. This event occurs when panel tampered
during the entry delay.
[032] Priority Tamper Restore
Program 00 to disable this event or FF to enable. This event occurs when panel tamper
restored.
Table 9: Priority Temper Restore
Event
Identifier
Priority
Tamper
Priority
Tamper
Restore
[033] Communicator Firmware Update Begin
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
communicator firmware update begins.
[034] Communicator Firmware Update Successful
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
communicator firmware updated successfully completed.
[035] Panel Firmware Update Begin
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
panel firmware update begins.
[036] Panel Firmware Update Successful
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
panel firmware updated successfully.
[037] Panel Firmware Update Fail
Default (FF);
Program 00 to disable this event transmission or FF to enable. This event occurs when the
panel firmware updated has failed.
SIA
SIA
Reporting
Code
BA 000
BR 000
Contact
Contact ID
ID Event
Qualifier
Code
1 1
3 1
17
Contact ID
Contact ID
Reporting
User/Zone
Code
37 000
37 000