Cellular Receiver 1 Options; Cellular Receiver 2 Options; Cellular Options; System Information (Read Only) - DSC LE4000 Installation Manual

C R
ELLULAR ECEIVER
[201] Cellular Receiver 1 Account Code
Default (0000000000)
Valid range: 0000000001 - FFFFFFFFFE.
|____|____|____|____|____|____|____|____|____|____|
[202] Cellular Receiver 1 DNIS
Default (000000) Valid range: 000000 - 0FFFFF.
|____|____|____|____|____|____|
[203] Cellular Receiver 1 Address
Default (000.000.000.000). Valid range: 000-255.
|____|____|____||____|____|____||____|____|____|____|____|____|
[204] Cellular Receiver 1 Port
Default (0BF5/3061) Valid range: 0000 - FFFF.
|____|____|____|____|
[205] Cellular Receiver 1 APN Default ( )
32 ASCII characters.
____________________________________
[206] Cellular Receiver 1 Domain Name

Programming not permitted on UL/ULC listed system.
Default ( ) 32 ASCII characters.
____________________________________
C R
ELLULAR ECEIVER
[211] Cellular Receiver 2 Account Code
Default (0000000000)
Valid range: 0000000001 - FFFFFFFFFE.
|____|____|____|____|____|____|____|____|____|____|
[212] Cellular Receiver 2 DNIS
Default (000000) Valid range: 000000 - 0FFFFF.
|____|____|____|____|____|____|
[213] Cellular Receiver 2 Address
Default (000.000.000.000) Valid segment range:
000-255
|____|____|____||____|____|____||____|____|____|____|____|____|
[214] Cellular Receiver 2 Port
Default (0BF5/3061) Valid range: 0000 - FFFF.
|____|____|____|____|
[215] Cellular Receiver 2 APN
Default ( ) 32 ASCII characters.
____________________________________
[206] Cellular Receiver 1 Domain Name

Programming not permitted on UL/ULC listed system.
Default ( ) 32 ASCII characters.
____________________________________
C O
ELLULAR PTIONS
1 O
PTIONS
2 O
PTIONS
28
[221] Cellular Public Access Point Name
Default ( ) 32 ASCII characters
____________________________________
[222] Cellular Login User Name
Default ( ) 32 ASCII characters.
____________________________________
[223] Cellular Login Password
Default ( ) 32 ASCII characters.
____________________________________
[224] Cellular Test Transmission Time of day
Default (9999) Valid range: 00 - 23 hrs. (HH) 00 -
59 min. (MM).|____|____|____|____|
[225] Cellular Test Transmission Cycle
Default (000000)
Valid range: 000000 - 999999 minutes.
|____|____|____|____|____|____|
[226] Cellular Trouble Delay
Default (00) Program 00 disable or FF enable.
|____|____|
[901] Diagnostic Test Transmission
|___| [3] Cellular 1 Default (OFF).
|___| [4] Cellular 2 Default (OFF).
S I
YSTEM NFORMATION
O )
NLY
[988] DNS 1 IP Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[989] DNS 2 IP Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[991] Firmware Version
|____|____|____|____|____|____|____|____|
[994] Cellular IP Address
|____|____|____||____|____|____||____|____|____|____|____|____|
[995] SIM Number
____________________________________
[996] Cellular Telephone Number
This number is required for DLS, and Firm-
ware upgrades.
____________________________________
[997] IMEI Number
____________________________________
S R
YSTEM ESET
[999] Software Default
Default (99) Valid entries are 00 or 55
|____|____|
(R
EAD
D
EFAULTS