Information About Regulations; Conformity Standards; Electrical Security - GRAVOGRAPH M10 JEWEL User Manual

Information about regulations

Conformity standards

This hardware was designed and build in conformity with the relevant EC marking and EEC directives :
• "Machine Security" Directive 2006/42/EE
• "Electromagnetic compatibility" Directive 2004/108/EC
• "Low Voltage" Directive 2006/95/EC
The modification or transformation of this equipment, the adaptation and installation of
accessories not recommended by GRAVOTECH MARKING SAS, the installation of this
equipment in a manufacturing process, the piloting by a robot, the connection to an
external automaton, modify the characteristics of this material and can make it not
compliant with the European Directives it is subjected.These modifications voids the
responsibility of the manufacturer.
In this case, the person who fits the machine and the equipment is responsible for the EC
compliance of the final work station.
Electrical security
This hardware complies with standards EN 60204-1 and EN 60950-1.
The different fuses of the machine comply with the IEC 127-2 norm (International Electric Committee).
The different security levels the input/output answer are indicated for each connector in the chapter «Rear view of the
machine». Two security levels are possible :
- Dangerous voltage (power supply, accessories, plugs ...).
- Very low security voltage.
Machine security
This hardware is in conformity with the norm EN ISO12100-1 and EN ISO12100-2.
Electromagnetic compatibility
This hardware is in conformity with electromagnetic compatibility norms:
• EN 55022 - classe B ; EN 61000-3-2 ; EN 61000-3-3 (emission in residential, commercial, and light industrial
environment)
• EN 61000-6-2 (immunity in industrial environment)
All the cables used with this hardware must be in conformity with the electronic compatibility standards, norm EN 55022
- class B.
Electrical security
This material is «class 1». The mains plug MUST always be connected to a neutral socket
and comply with the regulations in force in the country of installation. If you do not have
a plug of this type, have one installed by an approved electrician. Under no circumstances
should you depart from this instruction.
The manufacturer bears no responsibility towards any user where alterations have been carried out contrary to the
manufacturer's specifications, notably with respect to electrical/electronic elements.
Any operation, other than those mentioned here, must only be carried out by an approved
Gravograph technician.
Do not take the machine apart to repair or clean it : this will void your guarantee.
This symbol indicates that once this equipment has reached the end of its useful life, it
must not be disposed of with non-sorted municipal waste, in accordance with the European
Directive 2002/96/EC.
The equipment must be disposed of at an appropriate collection point for processing,
sorting, and recycling of Waste Electrical and Electronic Equipment (DEEE).
The elements which compose Electrical and Electronic Equipment may contain
substances which have harmful effects on the environment or on human health.
By following these instructions, you are helping the environment, contributing to the
preservation of our natural resources, and protecting human health.
First Contact
M10 JEWEL Machine - Electronic Engraving Machine . 5