Description; Front View Of The Machine; Engraving Table; Chuck - GRAVOGRAPH M10 JEWEL User Manual

Description

The M10 JEWEL machine is a machine for engraving bracelets, wedding rings and rings.
It has a keyboard for controlling the machine.
Files to be engraved are transferred from the computer to the machine by the intermediary of a cable which is plugged into
the USB port on the M10 JEWEL machine.
The actual engraving process is controlled by a diamond tip.
The object to be engraved is held in place by 3 jaws (j1) fitted onto the chuck (J) with concentric fastening (consult your
GRAVOGRAPH dealer to find out about the various types of jaws available).
The M10 JEWEL machine cover a maximum engraving surface area of 9.8"x 0.6"
(250 x 15 mm).

Front view of the machine

Engraving table

A. Base
B. Control panel (flexible 9-key control keyboard)
D. Accessories drawer
Location for the outside engraving diamond tips
E.
J. Chuck (concentric fastening)
K. Tightening ring

Chuck

J1. Location for 3 jaws
J2. Location for the inside engraving diamond tips
J3. Directional arrow
M10 JEWEL Machine - Electronic Engraving Machine . 10 First Contacts